Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 2-37
Section 2. Installation and Configuration
PN 9001081
Rev. C
Printing Test Labels
LARGE LABEL
SMALL LABEL
STEP PROCEDURE
3. If SMALL is underlined, the Print Size message will be displayed. You
must enter the size of the label. The minimum label size that can be
selected is 4 cm (1.6) and the maximum size is 10 cm (3.9). Press
the FEED key and then press the LINE key to increment the setting by
1 cm each time the key is pressed. Once the maximum size is reached,
the display will wrap around and start incrementing at 4 cm again.
Once the correct label width is selected, press the FEED key to initiate
the print.
4. If you wish to pause the printer after it starts to print a test label,
press the FEED key. Press the FEED key again to resume the test
label printing. To stop the test label print, pause the printer and
then turn power off.
Print Size