Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-67
Section 4. Programming Reference
PN 9001081
Rev. C
Replace Data (Partial Edit)
Special Notes
1. Specify the exact same parameters for the image to be replaced as were
specified in the original data stream, including rotation, expansion, pitch,
etc. This will ensure that the new data will exactly replace the old image.
If the replacement data contains fewer characters than the old data, then
the characters not replaced will still be printed.
2. This command will not function if the power has been cycled off and back
on since the last label was printed.
3. Proportional Pitch text cannot be used with this command.
Printer Output