Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual Page D-5
Appendix D. Optional Accessories
PN 9001081
Rev. C
Plug-In Interface Cards
Several Plug-In Interface Cards are available for this printer. See Section 5
for types.
Follow the instructions supplied with the card(s) for installation.
PCMCIA Memory Cards
SLIDE LOCK TO THE LEFT AND
SWING COVER TO THE LEFT TO
ACCESS BATTERY COMPARTMENT
REPLACE WORN
BATTERY
SLIDE LATCH TO
THE RIGHT FOR
WRITE PROTECTION
To install the Memory Card(s)
1. On the back panel of the printer, remove screw to detach memory slot
cover.
2. Insert card in slot 1 or 2.
3. To replace worn battery, follow illustrations below.
Calendar
The Calendar Option allows the date and time to be maintained in the local
printer rather than using the system clock. It consists of a special clock chip that
replaces the EEPROM on the main PCB assembly. A qualified technician should
perform the upgrade as it requires modifications to the main PCB assemby.
Please call SATO Technical Support if you need to add this option to an existing
printer in the field.
For this option contact Sato America
NOTE: ALL DATA STORED ON
THE CARD WILL BE LOST WHEN
THE BATTERY IS REPLACED