Filter
Top Products
PN 9001081
Rev. C
SATO M-5900RV Operator and Technical Reference Manual
Page 2-2
Section 2. Installation and Configuration
2.2 Unpacking and Parts Identification
Unpack the printer as follows:
Place the box upright on a solid, flat surface.
Open the box and remove any loose items and the first layer of packing
material.
Carefully lift the printer from the box and place it on a solid flat surface.
Inspect the shipping container and printer for any signs of damage that
may have occurred during shipping.
Remove the plastic covering from the printer.
Remove the accessory items from their protective containers.
If the printer has been stored in a cold environment, allow it to reach
room temperature before powering it on.
. NOTE: The following illustrations are representative only. Your printer may not be
packed exactly as shown here, but the unpacking steps are similiar.
REMOVE PACKING MATERIAL
LIFT THE PRINTER FROM
THE BOX CAREFULLY