Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-104
Section 4. Programming Reference
PN 9001081
Rev. C
Two-Dimensional Bar Codes
Maxicode
This command is used to create two-dimensional symbologies
supported by M-5900RV printers
Command Structure
<ESC>BVa,b,c,ddddddddd,eee,fff,gggg...<ESC>
a = Position of Maxicode symbol within the set, when used in a structured
append format 1-8.
b = Total number of Maxicode symbols in the set, when used in a structured
format 1-8.
c = 2 For Mode 2 Structured Carrier Message for Domestic U.S. UPS
shipments.
3 For Mode 3 Structured Carrier Message for International UPS
shipments.
4 Standard symbol
5 Not currently supported
6 Reader programming
ddd..ddd 9 digit numeric Postal Code
eee = 3 digit numeric Country Code
fff = 3 digit numeric Service Code
gg..g = Data, terminated by <ESC>
Example: <ESC>BV1,2,3,123456789,222,333,MESSAGE<ESC>
Placement: Immediately preceding data to be encoded
Default: None
Command Function
To print a Maxicode two-dimensional bar code image on a label. See Appendix B for
specific information on using each individual bar code symbol.
Command Function
To print a UPS Maxicode symbol.
Input to Printer
<ESC>A<ESC>V0100<ESC>H0100
<ESC>BV1,1,2,123456789,840,001,[)<RS>01<GS>961Z01547089<GS>UPSN
<GS>056872<GS>349<GS>99999999<GS>001/005<GS>029<GS>N<GS>
<GS>LENEXA<GS>KS<RS><EOT>
<ESC> Q001<ESC> Z