Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-52
Section 4. Programming Reference
PN 9001081
Rev. C
Line Feed
Command Structure
<ESC>Eaaa
aaa = Number of dots (001-999) between the bottom of the characters on one
line to the top of the characters on the next line.
Example: <ESC> E010
Placement: Preceding the text that will use the line feed function
Default: None
Command Function
To print multiple lines of the same character size without specifying a new print
position for each line. With the Line Feed command, specify the number of dots
you want between each line. Then send an ASCII <CR> at the end of each line
of text. The printer automatically identifies the size of the last character, moves
down the number of dots specified, and begins printing the next line.
Printer Input
<ESC>A
<ESC>E010<ESC>H0050<ESC>V0050<ESC>L0202<ESC>S
THIS IS THE 1ST LINE
THIS IS THE 2ND LINE
THIS IS THE 3RD LINE
<ESC>Q1<ESC>Z
Printer Output