Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-83
Section 4. Programming Reference
PN 9001081
Rev. C
Memory Card Function
Expand Memory Area
This command requires the Memory Card option.
Command Structure
<ESC>EXa
a = Memory Designation
0 Use Printer Memory
1 Use Memory Card Slot 1
2 Use Memory Card Slot 2
Example: <ESC>EX1
Placement: In its own data stream immediately after powering on.
Default: None
Command Function
This command expands the memory available to image labels by using the
Memory Card.
Printer Input
<ESC>A
<ESC>EX2
<ESC>Z
Printer Output
There is no printer output as a result of this command.
Special Notes
1. You must have the optional Memory Card to use this command. Call
your local SATO representative for details.
2. When the printer is turned off, the Memory Card is reset to normal
operation.
3. If the Memory Card specified already contains data, it cannot be used
for memory expansion.
4. The printer will reserve the specified Memory Card for expanded
memory until it is turned off or receives another <ESC>EX Expand
Memory Area command.
5. Use care with Line and Box commands as excessively long lines can
damage the print head.
6. The maximum vertical position that can be specified by the <ESC>V
vertical position command is shown in the following table.