Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-23
Section 4. Programming Reference
PN 9001081
Rev. C
Characters, Custom-Designed
Command Structure
Store Command: <ESC>Tabcc
Recall Command: <ESC>Kab90cc
a = 1 16x16 matrix
2 24x24 matrix
b = Specifies the character encoding method for the data stream
H Hexadecimal characters
B Binary characters
cc = Memory location to store/recall the character. Valid memory locations
are 21 to 52 (counting in Hex) or "!" to "R" in Binary.
(data) = Data to describe the character
Example: <ESC>T1H3F
<ESC>K1H903F
See Appendix C for a more detailed explanation.
Placement: The Store command is typically sent in its own data stream to the printer,
between the Start/Stop commands. The Recall command is sent in a
secondary data stream to print the character and follows any necessary
position or size commands.
Default: None
Command Function
To allow for the creation, storage, and printing of custom characters, such as special
fonts or logos. Up to 50 individual characters may be stored in the custom character
volatile memory.
Printer Input
See Appendix C for a detailed explanation.
<ESC>A
<ESC>T1H3F
0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0
<ESC>Z
<ESC>A
<ESC>H150<ESC>V100<ESC>L0505<ESC>K1H903F
<ESC>H350<ESC>V100<ESC>L1010<ESC>K1H903F
<ESC>Q1<ESC>Z