Filter
Top Products
PN 9001081
Rev. C
SATO M-5900RV Operator and Technical Reference Manual
Page 2-34
Section 2. Installation and Configuration
Advanced Mode
Ignore Carriage Return/Line Feed
This setting is an entry provided to ignore a Carriage Return or Line Feed
command in the data stream.
There are two Darkness (or heat range) settings. If you are printing large amounts of
coverage on each label you will want to choose TYPE 2 to prevent head saturation or
excessive heat buildup. The current setting is indicated by a line under one of the range
settings. Refer to Page 2-40 for user mode darkness settings that work in conjunction with
these two broad range settings.
STEP PROCEDURE
1. Use the LINE key to step the underline cursor to the desired setting.
2. Once the desired setting is underlined, press the FEED key to
accept the setting and advance to the next adjustment.
To access this setting, perform the following steps:
print darkness
type 1
Exit Advanced Mode
Print Darkness Setting
STEP PROCEDURE
1. Use the LINE key to step the underline cursor to either NO or Ye s.
2. Once the desired setting is underlined, press the FEED key to
accept the setting and advance to the next adjustment. If you selected Yes
the display will advance to OFFLINE. If you selected NO you will continue
in the Advanced Mode for access to the Advanced Mode Counters.
Once the desired setting is underlined, press the FEED key.
ignore cr/lf
yes no
STEP PROCEDURE
1. Use the LINE key to step the underline cursor to the desired setting.
2. Once the desired setting is underlined, press the FEED key to
accept the setting and advance to the next adjustment.
offline
000000
advanced mode
setup
Feed Key
exit adv. mode
no yes