Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-102
Section 4. Programming Reference
PN 9001081
Rev. C
Two-Dimensional Bar Codes
Data Matrix, Sequential Numbering
This command is used to create two-dimensional symbologies
supported by M-5900RV printers
Command Structure
<ESC>FXaaabcccdddeee
aaa = Number of duplicate labels to be printed (001-999).
b = Increment or Decrement
+ = Increment
- = Decrement
ccc = Increment/Decrement Steps (001-999)
ddd = Sequential numbering start position (001-999)
Referenced to left side.
eee = Incremented data length measured from start position (001-999).
Placement: Immediately following the <ESC>BX Data Format designation command
and preceding the <ESC>DC Print Data command.
Default: None
Command Function
To print sequential numbered Data Matrix symbols.
Printer Input
<ESC>A
<ESC>V0100<ESC>H0100
<ESC>BX03081010000000001
<ESC>FX002+001005003<ESC>DC000060000
<ESC> Q4<ESC> Z
Printer Output
Label Set #1