Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-58
Section 4. Programming Reference
PN 9001081
Rev. C
Print Darkness
Command Structure
<ESC>#Ea
a = Print darkness value
(see Note 2 for allowable setting)
Example: <ESC>#E2
Placement: Must be placed immediately after <ESC>A and immediately before
<ESC>Z in its own separate data stream.
Default: See Note 2
Command Function
To specify a new print darkness setting. This command allows software control of
the darkness setting for unique media and ribbon combinations.
Printer Input
<ESC>A
<ESC>#E2
<ESC>Z
Printer Output
There is no printer output for this command.
Special Notes
1. This becomes the new setting in the printer configuration for all subsequent
print jobs unless changed. The setting is stored in non-volatile memory and
is not affected by cycling power.
2. The allowable Print Darkness settings are as follows:
VR0095-M
sgnitteSssenkraD,2,1 3 5ro,4,
Default values are shown in bold type