Filter
Top Products
SATO M-5900RV Operator and Technical Reference Manual
Page 4-21
Section 4. Programming Reference
PN 9001081
Rev. C
Base Reference Point
Command Structure
<ESC>A3H-aaaaVbbbb
- = This character is optional. When present, it specifies that the horizontal
offset is in the negative direction. If it is left out the offset direction is
positive.
aaaa = Horizontal Print Offset (see Note 5 for field range)
bbbb = Vertical Print Offset (see Note 5 for field range)
Example: <ESC>A3H100V0050
Command Function
To establish a new base reference point for the current label. The base reference point
is the top left corner or "origin" from where all print position commands are based.
This command may be very helpful when using labels less than four inches wide to
place images on the printable label surface. It may also be used to move images past
preprinted fields on a label.
Printer Input
<ESC>A<ESC>L0202
<ESC>H0025<ESC>V0025<ESC>WB0NORMAL REFERENCE POINT
<ESC>A3H0300V0075
<ESC>H0100<ESC>V0050<ESC>WB0NEW REFERENCE POINT
<ESC>Q1<ESC>Z
Printer Output