Filter
Top Products
ADC Telecommunications, Inc.
158 C
HAPTER 8: TIMING AND ALARM CONTROLLER MANAGEMENT
To configure the alarm signals for transmit over the DB-15 connector and the
associated signals that can trigger them, perform the following tasks. By
default, all faults are configured to not send out their associated alarm
signals over the DB-15 connector:
Power Alarm ■ local-pwr-a-fault
■ local-pwr-b-fault
■ backplane-pwr-fault
■ backplane-pwr-a-fault
■ backplane-pwr-b-fault
■ ps-ac-fault
■ ps-dc-fault
Temp Fault ■ processor-temp-fault
■ ps-temp-fault
■ fan-temp-fault
Power Fault ■ local-pwr-a-fault
■ local-pwr-b-fault
■ backplane-pwr-a-fault
■ backplane-pwr-b-fault
■ ps-ac-fault
■ ps-dc-fault
PowerA Fail ■ local-pwr-a-fault
PowerB Fail ■ local-pwr-b-fault
Clock ■ bits-a-fault
■ bits-b-fault
■ red-alarm-fault
You Can Configure This
Signal:
To Provide Notification of These Faults: