ADC 3 Switch User Manual


 
ADC Telecommunications, Inc.
56 C
HAPTER 2: ABOUT THE COMMAND LINE INTERFACE
Slot Mode
Slot mode provides access to slot-specific commands. To enter this mode,
you must specify a chassis/slot (c/s) combination that identifies the slot that
you want to administer. Within this mode, you can do the following:
Persist (save) configuration for the current module, or all modules in the
system
Configure and show trace log activity for the current slot
Reset the module contained in the slot, or all modules in the chassis.
To enter slot mode, enter slot <chassis/slot> from within any mode.
Table 2-9 lists available slot mode commands as they appear when you type
help at the command prompt. CLI global commands are not listed and can
be found in Table 2-1 on page 42. Note that the help command output
displays many commands in their abbreviated form.
Table 2-9 Slot Mode Commands
Command Description
copy Downloads a file from a TFTP server to flash.
cpu-utilization Enables CPU utilization on the module.
filter-aging Configures IP packet filtering for all interfaces in the
slot.
reset Reboots a module.
save Saves the system configuration for all slots to persistent
storage.
trace-log Configures event logging for the slot.