ADC 3 Switch User Manual


 
Cuda 12000 IP Access Switch CLI-based Administration Guide
Managing Quality of Service 479
Example 3
The following example displays an Admitted parameter set for a specified
Service flow:
interface:cable:csi(1/1/1)# show modem 00:90:83:36:82:EE
service-flow 26 parameter-set 2
Cable Modem: 00:90:83:36:82:EE
SFID 26
Param Type admitted
Service Class Name
Priority 0
Max Traffic Rate 0 (bits/sec)
Max Traffic Burst 1522 (bytes)
Min Reserved Rate 0 (bits/sec)
Min Reserved Packet 64 (bytes)
Active Timeout 0 (secs)
Admitted Timeout 200 (secs)
Max Concat Burst 0 (bytes)
Scheduling Type best effort
Nominal Polling Interval 0 (usecs)
Tolerable Poll Jitter 0 (usecs)
Unsolicited Grant Size 0 (bytes)
Nominal Grant Interval 0 (usecs)
Tolerable Grnat Jitter 0 (usecs)
Grants Per Interval 0
TOS AND Mask 11111111
TOS OR Mask 00000000
Max Latency 0 (usecs)
Request Policy Octets 00:00:00:00
Bit Map
NOTE: The following is the bottom half of the parameter set display. It
displays the BitMap for the above-mentioned parameters. Off indicates the
bit is not set, and on indicates the bit is set.
trafficPriority off
maxTrafficRate off
maxTrafficBurst off
minReservedRate off
minReservedPkt off
activeTimeout off
admittedTimeout off
maxConcatBurst off
schedulingType off
requestPolicy off
nomPollInterval off
tolPollJitter off