Filter
Top Products
Cuda 12000 IP Access Switch CLI-based Administration Guide
Defining Modulation Profiles 427
Deleting Modulation Profiles
You delete a modulation profile from a cable interface by performing the
following tasks
.
The following example deletes modulation profile 3 from interface 1/1/1:
Task Command
1. Enter cable interface mode. interface cable <c/s/i>
2. Delete the specified modulation
profile.
no modulation-profile
<profile-index>
cli:172.16.19.10:interface:cable:csi(1/1/1)# show modulation-profile 3
row count: 1
Interval Mod Pream Pream Diff FEC FEC CW Scram Max Guard Last Scram
Usage Type Offset Len Error Len Seed Burst Time CW Enable
Size
-------- ----- ------ ----- ---- ----- ------ ----- ----- ----- ---- ------
Short QPSK 496 384 yes 5 34 0 0 8 no yes
cli:172.16.19.10:interface:cable:csi(1/1/1)# no modulation-profile 3
cli:172.16.19.10:interface:cable:csi(1/1/1)# show modulation-profile 3
Modulation Profile 3 does not exist!
cli:172.16.19.10:interface:cable:csi(1/1/1)#