ADC 3 Switch User Manual


 
ADC Telecommunications, Inc.
274 C
HAPTER 14: CONFIGURING IP
Viewing IP Interfaces
You can use the following commands to view IP interfaces:
show ip address: Use this command within interface configuration
mode to view a list of IP addresses added to that current physical
interface.
show ip interface: Shows IP address information and additional
information about the physical interface on which the IP interface resides:
When issued within interface configuration mode, displays only
information relevant to the current interface.
When issued within slot mode, displays all IP interfaces within the
current slot.
When issued in any other mode, displays all IP interface configured
throughout the system.
Example 1
The following example displays all IP addresses added to cable interface
1/1/1:
cli:192.168.208.3:interface:cable:csi(1/1/1)# show ip address
Chassis/Slot/Interface 1/1/1
row count: 2
IP Address Net Mask Interface Priority
---------------- ---------------- ---------- ----------
201.1.1.1 255.255.255.0 8781825 Other
201.1.2.1 255.255.255.0 8781825 Primary