Filter
Top Products
ADC Telecommunications, Inc.
362 C
HAPTER 17: MANAGING IP MULTICAST
Deleting IGMP Groups
You can delete IGMP groups that you join on an interface using the ip igmp
join-group command. You can delete these groups in two ways:
■ Using the no ip igmp join-group command
■ Using the clear ip igmp group command
To delete groups with the no ip igmp join-group command:
To delete multicast group entries with the clear ip igmp group command:
Task Command
1. Enter interface mode. root
2. Display groups. show ip igmp groups
3. Specify the multicast address of
the group you want to delete.
no ip igmp groups <group-address>
Task Command
1. Enter root mode or interface mode. enable root
or
interface <c/s/i>
2. Display multicast groups. show ip igmp groups
3. Specify arguments as follows:
■ To flush the entire cache on the Cuda
12000, issue the command in root mode
without specifying a group address.
■ To remove a single multicast group from all
interfaces on the Cuda 12000, issue the
command in root mode and specify the
address of the group.
■ To remove all multicast groups from an
interface, issue the command in interface
mode without specifying a group address.
■ To remove a single multicast group from an
interface, issue the command in interface
mode and specify the address of the group.
clear ip igmp group
[<group-address>]