ADC 3 Switch User Manual


 
ADC Telecommunications, Inc.
570 A
PPENDIX A: COMMAND SUMMARY
OSPF Commands
Table A-6 Open Shortest Path First (OSPF) Commands
Command Mode Description
asbr router:ospf Configures the system as an
Autonomous System Border
Router (ASBR).
ip ospf area-id <area-id>
[{enable | disable}]
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Configures the Area ID for the
current interface. The Area ID
designates the OSPF area to which
this IP interface belongs.
ip ospf authentication {md5 |
password}
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Configures the authentication type
for the OSPF interface.
ip ospf authentication {key-id <id>
key <key> | key <key>}
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Configures the authentication key
for the OSPF interface.
ip ospf cost <number> interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Defines the cost metric for this IP
interface.
ip ospf dead-interval
<number of seconds>
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Defines the dead-interval for this IP
interface.
ip ospf hello-interval
<number of seconds>
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Specifies the length of time, in
seconds, the router waits between
sending Hello packets on the
current IP interface.
ip ospf priority <number> interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Assigns the interface priority the
current IP interface.
ip ospf retransmit-interval
<number of seconds>
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Sets the Link State Advertisement
(LSA) retransmit interval in seconds
for the current IP interface.
ip ospf transit-delay
<number of seconds>
interface:<type>:csi
<c/s/i>:ip-address
<ip address>
Sets the number of seconds it
takes to transmit a link state
update packet on the current IP
interface.