Filter
Top Products
ADC Telecommunications, Inc.
192 C
HAPTER 9: SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP)
■ docs-init-rsp-fail A registration response failure from
the cable modem occurred during the
cable modem initialization process and
was detected on the CMTS side.
Provisioning events: Provisioning events refer to faults that
pertain to the FastFlow BPM running
on the Cuda 12000.
■ duplicate-addr A duplicate IP address has been
detected.
■ isp-addr-high The free IP address count exceeded
the upper threshold for the specified
ISP.
■ isp-addr-low The free address count fell below the
lower threshold for the specified ISP.
■ ldap-failed A directory server access failure
occurred.
■ ldap-restored Directory server access is operational
after a failure.
■ prov-service A FastFlow BPM service started,
stopped, or failed.
■ subnet-addr-high The free IP address count exceeded
the high available address threshold
for a subnet.
■ subnet-addr-low The free IP address count fell below
the low available address threshold for
a subnet.
Routing events: Routing events refer to events that
indicate a change in the state of OSPF
neighbors and OSPF virtual neighbors.
■ ospf-nbr-state Signifies a change in the state of an
OSPF neighbor on a physical interface.
To send this notification type, note
that you also have to enable sending
of OSPF neighbor state traps using the
report command.
Parameter Description