Filter
Top Products
Cuda 12000 IP Access Switch CLI-based Administration Guide
Viewing Services 449
Viewing Services
Services are assigned when the cable modems are provisioned. The CMTS
dynamically assigns a Service ID number to the cable modem. A cable
modem keeps the same Service ID for as long as it continues to range and is
registered with the CMTS. For example, if a cable modem is reset or goes
through a power cycle, CMTS reassigns the next available Service ID number
to the cable modem the next time it ranges and registers. To view a list of
services currently assigned by the cable interface, perform the following task
in interface cable <c/s/i> mode.
Task Command
1. Enter this command from within
root mode or cable interface
configuration mode to sort the
cable modem display according to
services assignment ID.
show interface cable <c/s/i> <sid>
2. Enter this command from within
cable interface configuration
mode to sort the cable modem
display according to services
assignment ID.
show <sid>
3. Issue this command from within
root mode or cable interface
configuration mode to display a
specific cable modem according
to SID.
show interface cable <c/s/i> sid <sid>
4. Enter this command from within
cable interface configuration
mode to display a specific cable
modem according to SID.
show sid <sid>