Filter
Top Products
ADC Telecommunications, Inc.
324 C
HAPTER 14: CONFIGURING IP
Removing IP Source Routes
To remove an IP source route entry from a particular interface, perform the
following tasks:
The following example configures interface 1/1/1 to forward any packets
received from the 172.16.19.0 network to the router at 172.20.19.4:
cli:172.16.19.10:interface:cable:csi(1/1/1)# no ip source-route
172.16.19.0 255.255.255.0 172.20.19.4
cli:172.16.19.10:interface:cable:csi(1/1/1)# show ip interface
source-route
Address Mask NextHop
---------------- ---------------- ----------------
172.16.19.0 255.255.255.0 172.20.19.4
row count: 1
cli:172.16.19.10:interface:cable:csi(1/1/1)# show ip interface
source-route
Address Mask NextHop
---------------- ---------------- ----------------
row count: 0
cli:172.16.19.10:interface:cable:csi(1/1/1)#
Task Command
1. Enter interface mode. interface <c/s/i>
2. Remove a source route
entry.
no ip source-route <ip address> <mask> <next
hop gateway>