Filter
Top Products
ADC Telecommunications, Inc.
416 C
HAPTER 18: CONFIGURING CABLE MODEM TERMINATION SYSTEMS
Frequency Hopping Statistics
Frequency Hopping also provides statistics for you to monitor the condition
of your plant. Within interface:cable:csi mode you may view these
statistics. You can display statistics for all policies on a single channel or all
channels:
■ Error Rate: The percentage of errors.
■ Error Count: The number of frames with errors.
■ Total Packets: The total number of frames received for each policy.
You display statistics for all policies on a single channel by performing the
following tasks:
You display statistics for all policies on all channels by performing the
following tasks:
Task Command
1. Enter cable interface mode. interface cable <c/s/i>
2. Display statistics to monitor the
condition of your plant.
show spectrum-group stats
upstream <port number>
Task Command
1. Enter cable interface mode. interface cable <c/s/i>
2. Display statistics to monitor the
condition of your plant.
show spectrum-group stats
upstream