ADC 3 Switch User Manual


 
ADC Telecommunications, Inc.
256 C
HAPTER 12: CONFIGURING DHCP RELAY
To configure a DHCP Policy and a BOOTP policy, perform the following tasks:
To display the DHCP or BOOTP policies currently configured on a cable
interface, perform the following tasks:
Task Command
1. Enter cable interface mode. interface cable <c/s/i>
2. Create a DHCP Policy. dhcp-policy {<policy-index> | default} {deny |
permit} {<ip-address>... | forward-internal
[disable] } [agent-option {cm | cpe} | cmmac
<mac-address> | interface <c/s/i> | mac
<mac-address> [mask <mask>]]
[vendor-class-id {cm | mta}] [description
<string>]
3. Create a BOOTP policy. bootp-policy {<policy-index> | default}
{deny mac <mac-address> [mask <mask>] ...
| permit <ip-address>... mac <mac-address>
[mask <mask>] ...} [description <string>]
Task Command
1. Enter cable interface mode. interface cable <c/s/i>
2. Display all DHCP policies. show dhcp-policy
3. Display all BOOTP policies. show bootp-policy
4. Display a specified DHCP policy. show dhcp-policy <policy-index>
5. Display a specified BOOTP
policy.
show bootp-policy <policy-index>
6. Display the default DHCP policy. show dhcp-policy default
7. Display the default BOOTP
policy.
show bootp-policy default