Filter
Top Products
ADC Telecommunications, Inc.
428 C
HAPTER 18: CONFIGURING CABLE MODEM TERMINATION SYSTEMS
Configuring CMTS Privacy Parameters
You can configure BPI and BPI+ privacy parameters on a cable interface.
Information on configuring both CMTS and cable modem privacy
parameters can be found in “Configuring BPI and BPI+ Parameters”
onpage 453.
Configuring Flap Control
Flap Control configuration sets the control of the flap list by configuring the
size and entry thresholds, as described in the following sections.
Flap-list size
The Flap-list size parameter sets the maximum number of entries (modems)
in the flap list. By default, flat-list size sets the table at 8191 rows.
Acceptable values are 0 to 8192.
You configure the maximum flap list size by performing the following tasks:
.
Task Command
1. Enter cable interface mode. interface cable <c/s/i>
2. Set maximum flap table size. flap-list size <value>