Filter
Top Products
ADC Telecommunications, Inc.
498 C
HAPTER 20: SUBSCRIBER MANAGEMENT
Protocol The protocol that the filter attempts to
match. Specify one of the following
protocols: TCP, UDP, Any, and Number.
■ You may obtain protocol numbers from
the Internet Assigned Numbers Authority
(IANA) at www.iana.org.
■ You may specify a protocol number from 0
to 256. Note that specifying 256 is the
same as specifying “Any.”
TOS Value The two-digit hexadecimal number indicating
the Type of Service (TOS) value to be matched
against the TOS value in IP packets (for
example, 0a). The default is 00.
TOS Mask The two-digit hexadecimal number that
specifies the mask to be applied to the TOS
value matched in the IP packet (for example
1b). The mask determines which bits are
matched (a 0 specifies a match while a 1
specifies no match).
The default is 00, which means that the TOS
value you specify is matched against all TOS
values in IP packets.
Source Port (Applies only to
TCP or UDP filters.)
Optional. The source TCP or UDP port
number to match. Specify one of the
following values:
■ Any: Match any source port
■ Number: Match a source port number to
the TCP or UDP port. The allowable TCP or
UDP port number range is 0 to 65536.
Note that specifying 65536 is the same as
specifying “Any.”
Destination Port (Applies
only to TCP or UDP filters.)
Optional. The destination TCP or UDP port
number to match. Specify one of the
following values:
■ Any: Match any source port
■ Number: Match a source port number to a
TCP or UDP port. The allowable TCP or
UDP port number range is 0 to 65536.
Note that specifying 65536 is the same as
specifying “Any.”
Parameter Description