Filter
Top Products
ADC Telecommunications, Inc.
414 C
HAPTER 18: CONFIGURING CABLE MODEM TERMINATION SYSTEMS
Display All Policies on Single Upstream Channel
You display all policies on a single upstream channel by performing the
following tasks:
Example
The following example displays all policies on upstream channel 1, and
shows that there is only one policy configured.
cli:192.168.208.3:interface:cable:csi(1/1/1)# show
spectrum-group 1 upstream 1
Upstream ID 1
Rule Number 1
Threshold 1
Interval 10
Frequency (MHz) 5.0
Profile Num 1
cli:192.168.208.3:interface:cable:csi(1/1/1)#
Task Command
1. Enter interface cable mode. interface cable <c/s/i>
2. Display the frequency hopping
policy on an upstream channel.
show spectrum-group upstream
<port number>