Filter
Top Products
Cuda 12000 IP Access Switch CLI-based Administration Guide
Broadcasting Messages to Users 91
Broadcasting Messages to Users
The talk command enables you to broadcast messages to all chassis users
and to enable and disable the ability to broadcast messages.
To broadcast messages to users, perform the following task:
To enable or disable the broadcast capability, perform the following task:
Example
cli:192.168.208.3:root# talk "Testing the broadcast message feature"
@14:20:42 root@techpubs:: Testing the broadcast message feature
cli:192.168.208.3:root#
Task Command
From any mode, send a broadcast
message.
talk <message-string>
Note that if the string contains spaces,
enclose it in quotes.
Task Command
From any mode, enable or disable
the broadcast capability.
talk {enable | disable}