Filter
Top Products
ADC Telecommunications, Inc.
48 C
HAPTER 2: ABOUT THE COMMAND LINE INTERFACE
spectrum-group Configures spectrum group rules.
sync-interval Configures the time interval between synchronization
message transmissions on the downstream channel.
trace-log Configures event logging for the interface.
ucd-interval Configures the time interval between transmission of
successive Upstream Channel Descriptor (UCD)
messages for each upstream channel.
upstream Configures upstream channels.
Table 2-4 Ethernet Interface Mode Commands
Command Description
access-class Applies an access list to the current interface.
access-list Creates an access list, which consists of IP filtering
rules.
add Adds a static ARP entry for the current interface.
arp Sets the ARP timeout parameter.
bootp-policy Defines BOOTP request policies.
dhcp-authority Adds a DHCP authority range. The command also
enables and disables DHCP authority.
dhcp-policy Configures several parameters in the DHCP packet and
determines the list of servers to which the DHCP
packet is sent.
dhcp-relay Configures DHCP relay agent options.
duplex Configures the duplex mode for the interface (full
duplex, half duplex, or auto).
link-trap Enables link traps for the interface.
negotiation Configures an Ethernet port to automatically negotiate
duplex and speed.
shutdown Enables you to administratively shut down an interface.
speed Configures the speed for an Ethernet port.
Table 2-3 DOCSIS Interface Mode Commands
Command Description