Filter
Top Products
Cuda 12000 IP Access Switch CLI-based Administration Guide
Configuring OSPF 311
Example
The following example configures OSPF parameters on IP interface
201.1.1.1:
cli:# router ospf
mode: router:ospf
cli:# show ospf area
row count: 2
Area Id Auth Type ImpAsExt SPF ABR ASBR LSA LSA Area Area
Count Count Count Cksum Summary Type
---------------- --------- -------- ---- ----- ----- ----- ------ ------- -----
0.0.0.0 None Extern 32 0 0 1 26284 Send Norm
0.0.0.1 None Extern 8 0 0 1 45702 Send Norm
cli:# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:# ip address 201.1.1.1 255.255.255.0
cli:# ip ospf area 0.0.0.1
cli:# ip ospf cost 500
cli:# ip ospf dead-interval 500
cli:# ip ospf hello-interval 500
cli:# ip ospf priority 100
cli:# ip ospf retransmit-interval 500
cli:# ip ospf transit-delay 500
cli:# ip ospf authentication password
cli:# ip ospf authentication key mysecret
cli:# show ip ospf
IP Address 201.1.1.1
Area ID 0.0.0.1
Type Bcast
Priority 100
Transit Delay 500
Retrans Int 500
Hello Int 500
Dead Int 500
Poll Int 0
Admin Stat Enabled
Status Active
Auth Type Simple Password
Auth Key Id 0
Cost 500