Filter
Top Products
8-10 Setup and Other Utilities in the Desktop Manager Chapter 8
•
Default Action if No Answer to Telephone
You set this option to Receive if you want the MultiPASS to
handle an incoming call, detected as a telephone call that is not
answered, as an incoming fax. If no fax is received, the line is then
disconnected. If you set this option to Disconnect, the MultiPASS
automatically disconnects the unanswered call without switching
to try and receive a fax.
❍ Answering Machine Mode Options
You select this option to set the MultiPASS L6000 to automatically
switch to fax receive mode if your telephone caller does not speak
within the specified amount of time.
You can set the number of seconds (1-99) the MultiPASS L6000 will
wait before switching to fax receiving mode if the telephone caller does
not speak.
❍ Remote
You select the Receive option so that you can receive a fax by pressing
an ID code on the telephone attached to the MultiPASS. You assign a
remote Identification Number (00-99) that signals the MultiPASS to
receive the fax. The default number is 25.
❍ DRPD Switch Options
If you select DRPD for the Receive Mode, you need to set up the
Ring Pattern, Action, Fax ID, and Fax Number. See the DPRD
description starting on page 5-9 for complete details on how these
settings work with your MultiPASS.
MP L6000—USERS MANUAL/V000/12-97
DTM_10A.TIF