Filter
Top Products
Chapter 4 Sending Faxes With the MultiPASS L6000 4-7
❍ If there is no group registered under the one-touch speed
dialing button or the two-digit code, the LCD displays the
NO TEL #
message. Make sure you entered the correct
number and that the group has been registered correctly to
a speed dial code. See page 3-20.
❍ If you make a mistake when dialing, press
STOP
. You can
try again.
Redialing
Manual
To start dialing again, just press the REDIAL/PAUSE button. The
MultiPASS redials the previous number you dialed with the numeric
buttons. Make sure the document is in the ADF.
Automatic
The MultiPASS automatically redials if the first attempt at sending fails
(for example, if the line is busy). The unit redials twice, and the time
between redials is two minutes. (These are the default settings.) The LCD
displays AUTO REDIAL and the transaction number while the MultiPASS is
redialing.
If the MultiPASS fails to make a connection after the last redial, it beeps.
The LCD displays
BUSY/NO SIGNAL; try sending again later.
You can change the number of redials and the time between redials. The
redialing options are set in the Send Fax dialog box of the MultiPASS
Desktop Manager; see page 8-4.
BUSY/NO SIGNAL
TX/RX NO. XXXX
AUTO REDIAL
MP L6000—USERS MANUAL/V000/12-97
Sending Faxes