Filter
Top Products
2-8 Printing With the MultiPASS L6000 Chapter 2
MP L6000—USERS MANUAL/V000/12-97
The Paper Path
Understanding how paper feeds through the MultiPASS will help you to
determine how to load paper and handle paper jams.
The page travels first to the FX-3 Toner Cartridge. Here a laser beam
“draws” the print image on the drum, then the drum applies toner to the
page. The page then travels to the fixing assembly where the toner is fused
to the page. The page then exits the unit from the front or top.
When you are printing, follow these guidelines:
❍ Always set the paper delivery selector before starting to print.
❍ Do not change the paper delivery selector while a document is
printing. This may cause a paper jam to occur.
❍ Make sure there is enough room for the paper to exit from the
faceup delivery slot.
❍ Do not pull the paper as it comes out of the unit.
❍ When using faceup delivery, be sure to remove each sheet of paper
from the output tray.
AUTOMATIC DOCUMENT FEEDER
RECORDING
PAPER—MULTI-
PURPOSE TRAY
TONER
CARTRIDGE
MANUAL FEED
SLOT
PAPER_PATH
FACEDOWN DELIVERY
FACEUP DELIVERY