Filter
Top Products
Entering Information in the MultiPASS
When using the MultiPASS as a stand-alone fax machine, you must enter
your user information into the unit through the operator panel.
When entering information through the operator panel of the MultiPASS,
follow these guidelines.
❍ If you pause and do not make an entry for more than 60 seconds, the
MultiPASS returns to Standby mode. You must start the procedure
over from the beginning.
❍ If you make a mistake while entering registration information, you can
correct it in one of two ways:
•
Press < or > to move the cursor under the wrong character, and
then enter the correct character.
•
Press STOP and reenter the information.
Entering Your User Information
Follow the steps below to set the date and time for your MultiPASS and to
enter your fax number and your name. The date and time appear in the
LCD display as well as on the documents you send. Your fax number and
name appear on each document you send.
MP L6000—USERS MANUAL/V000/12-97
B-2 Using the MultiPASS L6000 as a Stand-alone Fax Appendix B