Filter
Top Products
9-2 Maintaining the MultiPASS L6000 Chapter 9
❍ Never pull on the cord to unplug the MultiPASS. Pull on the plug
itself.
❍ Do not overload the electrical outlet where the MultiPASS is plugged
in.
❍ For your safety, unplug the MultiPASS during electrical storms.
❍ Lift the MultiPASS from the bottom only. Do not lift the unit by the
operator panel, front cover, or any of its trays.
Routine Maintenance
Your MultiPASS requires little routine maintenance. Follow these
guidelines to keep your MultiPASS in good operating condition:
❍ Before you clean the MultiPASS, be sure to print any faxes stored in
memory.
❍ Do not use tissue paper, paper towels, or similar materials for cleaning;
they can stick to the components or generate static charges.
❍ Be sure to disconnect the power cord before cleaning the unit.
❍ Lightly wipe the unit’s exterior with a clean, soft, lint-free cloth
moistened with water or diluted dishwashing detergent solution.
❍ Never use thinner, benzene, alcohol or any other organic solvent, as it
may damage the surface of the MultiPASS.
MP L6000—USERS MANUAL/V000/12-97
GRIP HERE
MP_L6000