Filter
Top Products
10-14 Troubleshooting Chapter 10
MP L6000—USERS MANUAL/V000/12-97
Message Error Code Cause Action
MEMORY USED nn% — Shows the percentage of If you need more space,
memory currently in use. print or send any
documents in memory.
NO ANSWER #005 The receiving fax Make sure you dialed
machine does not the correct number.
answer. Try again later.
NO RX PAPER #012 The other party’s fax is Contact the other party
out of paper or its and have them install
memory is full. paper in their fax.
NO TEL # #022 The one-touch or coded Register the number
speed dialing number (see page 3-18).
has not been registered.
NOT AVAILABLE — In manual sending, you Use regular dialing.
entered a speed dialing
number that is assigned
to a group.
PLEASE WAIT — The MultiPASS is Wait until the date and
warming up. Receive Mode appear in
the LCD display, then
begin.
REC’D IN MEMORY — The paper or toner ran Add paper to the multi-
out, or a paper jam purpose tray, change the
occurred, so the toner cartridge, or clear
MultiPASS received the the paper jam. The
document in memory. MultiPASS automatically
prints the document
stored in memory.
RECEIVED IN FILE — The computer was Turn the computer on
off and a document to upload the file to the
was received in the Desktop Manager.
memory of the
MultiPASS.
To print the document,
press FUNCTION then
scroll to FILE PRINT and
press START/COPY.
START AGAIN — An error has occurred Start the procedure
in the phone line or in again from the
the system. beginning.
TX/RX CANCELLED — You pressed STOP to Try sending again.
cancel the transmission.
TX/RX NO. nnnn — When the MultiPASS Write the number down
sends or receives a fax, if you’ll need it later.
it assigns it a unique
identification number.