Filter
Top Products
8-6 Setup and Other Utilities in the Desktop Manager Chapter 8
MP L6000—USERS MANUAL/V000/12-97
❍ Auto Start Send
When you select this option, the MultiPASS starts scanning
automatically five or ten seconds after you enter a phone number.
When you don’t select this option, you must press START/COPY to
scan the document, or the unit returns to standby mode after 60
seconds.
❍ Off Hook Alarm
You select this option to turn on the alarm if the telephone’s handset is
off hook.
❍ Image
You select a contrast setting that determines the level of contrast in the
faxes you send. The Standard setting is usually appropriate for most
documents. However, based on the lightness or darkness of your
original fax document, you may prefer to lighten or darken the
contrast for the fax transmission.
❍ Fax Heading
You select the position where you want the sent fax heading
information (your fax number, your name, and date and time) to print
on the faxes you send. This information is known as the Transmit
Terminal Identification (TTI). It can be printed either inside or
outside the image area of your fax page.
❍ On Error
You select Resend option if you want the MultiPASS to automatically
redial when an error occurs while sending a fax. You also select which
pages are to be resent: only the page on which the error occurred, the
page on which the error occurred and the first page of the fax, or all
pages.