Filter
Top Products
Chapter 10 Troubleshooting 10-27
MP L6000—USERS MANUAL/V000/12-97
Troubleshooting
Using Switch Boxes
Canon does not recommend using a switch box with the MultiPASS. To
use more than one printer, it’s a good idea to add a second parallel port to
your computer.
If the Power Goes Out
If power to the MultiPASS L6000 is cut off, any documents stored in its
fax memory will be lost. (The MultiPASS automatically prints a list of the
lost documents when power is restored.) Because of this, be sure to print
documents stored in memory or resend them as soon as possible.
While the power is out, the MultiPASS will receive telephone calls if a
telephone is attached. However, you cannot make calls (unless you are
using a cordless phone) or send or receive faxes.
Avoid unplugging the MultiPASS unless absolutely necessary. This is the
same as a power outage.
Memory Clear Report
The Memory Clear Report summarizes the documents that were cleared
from memory when a power failure occurred. This report is generated
automatically.
❍ If you experience a power failure, any documents stored in memory
will be lost.
❍ When you turn on the MultiPASS after power is restored, the
MultiPASS automatically prints out a list of documents that were
stored in the memory at the time of the power failure.
MEMORY CLEAR LIST