Filter
Top Products
edge switch 2/16 service manual 2–51
Diagnostics
—Parity - None.
— Stop bits - 1.
— Flow control - Hardware.
When the parameters are set, click OK. The HyperTerminal window displays.
i. At the > prompt, type the user-level password (the default is password) and press
Enter. The password is case sensitive. The HyperTerminal window displays with
software and hardware version information for the switch, and an C> prompt at
the bottom of the window.
j. At the C> prompt, type the ipconfig command and press Enter. The
HyperTerminal window displays with configuration information listed (including
the IP address).
k. Record the switch IP address.
l. Select Exit from the File pull-down menu to close the HyperTerminal application.
The following message box appears: