Filter
Top Products
1–12 edge switch 2/16 service manual
General InformationI
Figure 1–4: HAFM Server
The server is mounted in a slide-out drawer in an HP-supplied equipment rack. The
HAFM server or Internet access to the embedded web server interface is required to
install, configure, and manage the switch.
Although a configured switch operates normally without HAFM server intervention,
an attached server should operate at all times to monitor switch operation, log events
and configuration changes, and report failures.
The HAFM server provides an auto-detecting 10/100 Mbps LAN connection,
provided by an internal Ethernet adapter card. This LAN port attaches to the
customer’s public intranet to allow access from remote user workstations. An optional
Ethernet adapter card (not supplied by HP) can be installed in the personal computer
memory card international association (PCMCIA) slot to provide a connection to a
private LAN segment for dedicated switch communication.
HAFM Server Specifications
The following list summarizes hardware specifications for the HAFM server notebook
platform. Current platforms may ship with more enhanced hardware, such as a faster
processor, additional random- access memory (RAM), or a higher-capacity hard drive
or removable disk drive.
• HP Omnibook 6200 PC with color monitor, keyboard, keyboard-mounted
trackpad (mouse), and U. S. power cord.
•Intel
®
Pentium III™ processor with an 800 megahertz (MHz) or greater clock
speed, running the Microsoft Windows 2000 operating system.