Filter
Top Products
B–32 edge switch 2/16 service manual
Event Codes
Port Events (500 through 599)
NOTE: In the Edge Switch 2/16, ports are not included on separate assemblies (UPM cards),
therefore are not FRUs. Ports are an integral part of the switch’s main circuit board. UPM card
events apply to a single port as indicated by byte 13 of event data.
Event Code: 502
Message: UPM card anomaly detected.
Severity: Informational.
Explanatio
n:
The CTP detected a deviation in the normal operating mode or status of the indicated
port.
Action: No action required.
Event
Data:
Byte 0 = UPM slot position (00 through 0F) (not applicable).
Byte 1 = engineering reason code.
Bytes 4 through 7 = elapsed millisecond tick count.
Bytes 8 and 9 = high-availability error callout #1
Bytes 10 and 11 = high-availability error callout #2.
Byte 12 = detecting port.
Byte 13 = connected port.
Byte 14 = SBAR (not applicable).
Bytes 16 and 17 = high-availability error callout #3.
Bytes 18 and 19 = high-availability error callout #4.
Distributio
n:
Switch HAFM Server Host
EWS
Event
Log
System
Error
LED
Event
Log
E-Mail Call-Hom
e
Sense
Info
Link
Incident
44