Filter
Top Products
edge switch 2/16 service manual 3–5
Repair Information
For a description of the Session Log and an explanation of button functions at the
bottom of the log window, refer to the hp StorageWorks ha-fabric manager user guide
(A6534-96024/AA-RS2CA-TE).
Product Status Log
The Product Status Log (Figure 3–2) records an entry when the status of a switch
changes. The log reflects the previous status and current status of the switch, and
indicates the instance of a switch product manager application that should be opened
to investigate a problem. The information is useful to maintenance personnel for fault
isolation and repair verification.
To open the Product Status Log, select Product Status Log from the Logs menu on the
navigation control panel.
Figure 3–2: Product Status Log
The log contains the following columns:
• Date/Time - the date and time the switch status change occurred.
• Network Address - the IP address or configured name of the switch. This address
or name corresponds to the address or name displayed under the switch icon at the
Product View.
• Previous Status - the status of the switch prior to the reported status change
(Operational, Degraded, Failed, or Unknown). An Unknown status indicates the
HAFM application cannot communicate with the switch.
• New Status - the status of the switch after to the reported status change
(Operational, Degraded, Failed, or Unknown).
Fabric Log
The Fabric Log reflects the time and nature of significant changes in the managed
fabric.
To display the Fabric Log, choose Fabric Log from the Logs menu.