Filter
Top Products
3–50 edge switch 2/16 service manual
Repair Information
7. Click Yes. When the restore process finishes, the Restore Complete dialog box
displays.
8. Click OK to close the dialog box and return to the Hardware View.
Reset Configuration Data
NOTE: This procedure resets the switch IP address to the default of 10.1.1.10 and may disrupt
server-to-switch communication.
To reset the switch data to the factory default settings:
1. Notify the customer the switch is to be set offline. Ensure the customer’s system
administrator quiesces Fibre Channel frame traffic through the switch and sets
attached devices offline.
2. Set the switch offline ("
Set Offline State
" on page 3-38).
3. At the HAFM server, open the HAFM application. The Product View displays.
4. Select the icon representing the switch for which a configuration file is to be reset
to factory default settings. The Hardware View for the selected switch displays.
5. At the navigation control panel, select Reset Configuration from the Maintenance
menu. The Reset Configuration dialog box displays.
6. Click Reset. When the reset process finishes, the dialog box closes and the
application returns to the Hardware View.