Filter
Top Products
edge switch 2/16 service manual 2–23
Diagnostics
3. Return to the View panel (Port Properties tab).
Continue.
46
At the View panel, does the Operational State field display a Segmented message?
NO YES
↓
Port segmentation is indicated. Go to step 51 to obtain event codes. If no
event codes are found, go to "
MAP 0700: Fabric, ISL, and Segmented Port
Problem Determination
" on page 2-79.
47
At the View panel, does the Operational State field display a message indicating a link
incident or port problem?
NO YES
↓
A port problem is indicated. Go to step 51 to obtain event codes. If no event
codes are found, go to "
MAP 0600: Port Failure and Link Incident Analysis
" on
page 2-63.
48
Repeat step 44 through step 47 for each remaining port.
Is a link incident or port problem indicated for any of the ports?
NO YES
↓
A link incident problem or port SFP failure is indicated. Go to step 51 to obtain
event codes. If no event codes are found, go to "
MAP 0600: Port Failure and
Link Incident Analysis
" on page 2-63.
49
Inspect the power supply operational states.
a. At the View panel, click the Component Properties tab. The View panel
(Component Properties tab) displays.
b.
Inspect the
State
fields for both power supplies.