Filter
Top Products
2–86 edge switch 2/16 service manual
Diagnostics
b. Close the product manager application for the switch (Hardware View). The main
HAFM window, or Product View (still active) displays.
c. Select the Fabrics tab from the View menu. The Fabrics View displays with the
default Topology tab active.
d. Select the Zone Set tab at the bottom of the window. The Zone Set tab becomes
active and displays the active zone set.
e. Inspect zone names in the active zone set to determine the incompatible name.
f. Modify the incompatible zone name as directed by the customer:
1. At the navigation control panel, select Zone Sets from the Configure menu.
The Zone Sets dialog box displays.
2. Select (highlight) the active zone set name, then select Modify from the
Actions icon on the dialog box. The Modify Zone Set dialog box displays.
3. Select (highlight) the zone name to be modified (and later deleted) at the
Zone Library list, then select Copy Zone from the Actions icon on the dialog
box. The Copy Zone dialog box displays.
4. Type the new zone name (specified by the customer) and click OK. The new
zone name appears in the Zone Library list. The new zone contains the same
members as the copied zone.