Filter
Top Products
2–26 edge switch 2/16 service manual
Diagnostics
584 - Link failure - not-operational primitive sequence (NOS) received.
585 - Link failure - primitive sequence timeout.
586 - Link failure - invalid primitive sequence received for the current link state.
Were one or more event codes found?
YES NO
↓
Perform switch fault isolation at the HAFM server.
Go to step 3.
Go to Table 2–3 on page 2-2.
MAP 0100: Power Distribution Analysis
This MAP describes fault isolation for the switch power distribution system, including
defective AC power cords or power supplies.
1
Was an event code 200, 201, 202, or 208 observed at the switch Event Log (HAFM
server) or at the embedded web server event log?
YES NO
↓
Go to step 3.
2
The following table lists event codes, brief explanations of the codes, and the
associated steps that describe fault isolation procedures.
3
Is remote fault isolation being performed at the HAFM server?
YES NO
Event
Code Explanation Action
200 Power supply AC voltage failure. Go to step 6.
201 Power supply DC voltage failure. Go to step 10.
202 Power supply thermal failure. Go to step 10.
208 Power supply false shutdown. Go to step 6.