Filter
Top Products
edge switch 2/16 service manual 2–5
Diagnostics
433 Non-recoverable Ethernet fault. Go to
MAP
0400
.
440 Embedded port hardware failure. Go to
MAP
0600
.
502 Port module anomaly detected. No action
required.
504 Port module failure - error threshold
exceeded.
Go to
MAP
0600
.
505 Port module revision not supported. No action
required.
506 Fibre Channel port failure. Go to
MAP
0600
.
507 Loopback diagnostics port failure. Go to
MAP
0600
.
508 Fibre Channel port anomaly detected. Go to
MAP
0600
.
510 SFP hot-insertion initiated. No action
required.
512 SFP nonfatal error. Go to
MAP
0600
.
513 SFP hot-removal completed. No action
required.
514 SFP failure. Go to
MAP
0600
.
581 Implicit incident. Go to
MAP
0600
.
582 Bit-error threshold exceeded. Go to
MAP
0600
.
583 Loss of signal or loss of
synchronization.
Go to
MAP
0600
.
584 Not operational primitive sequence
(NOS) received.
Go to
MAP
0600
.
Table 2–3: Event Codes versus Maintenance Action (Continued)
Event
Code Explanation Action