Filter
Top Products
edge switch 2/16 service manual A–11
Messages
Password and
confirmation don’t
match.
Entries in the
password field and
confirmation
password field do not
match. The entries
are case sensitive
and must be the
same.
Enter the password and
confirmation password again.
Product manager
instance is currently
open.
A product cannot be
deleted while an
instance of the
product manager
application is open.
Close the product manager
application, then delete the
product.
Remote session
support has been
disabled.
The connection
between the
specified remote
workstation and the
HAFM server was
disallowed.
Consult with the customer’s
network administrator to
determine if the workstation
entry should be modified at
the Session Options dialog
box.
Remote sessions are
not allowed from this
network address.
Only IP addresses of
remote workstations
specified at the
Session Options
dialog box are
allowed to connect to
the HAFM server.
Consult with the customer’s
network administrator to
determine if the IP address is
to be configured for remote
sessions.
Resource is
unavailable.
The specified
operation cannot be
performed because
the product is
unavailable.
Verify the HAFM
server-to-product link is up. If
the link is up, the HAFM
server may be busy. Try the
operation again later.
Route data
corrupted.
The information for
this route is corrupt.
Try the operation again. If the
problem persists, contact the
next level of support.
Route request
timeout.
The Show Route
request timed out.
Try the operation again. If the
problem persists, contact the
next level of support.
Message Description Action