Filter
Top Products
edge switch 2/16 service manual A–5
Messages
Connection to HAFM
server lost. Click OK
to exit application.
The HAFM
application at a
remote workstation
lost the network
connection to the
HAFM server.
Start the HAFM application to
connect to the HAFM server.
Could not export log
to file.
A log file input/output
(I/O) error occurred
and the file could not
be saved to the
specified destination.
The disk may be full
or write protected.
If the disk is full, use another
disk. If the disk is write
protected, change the
write-protect properties or use
another disk.
Default zoning is not
supported in Open
Fabric Mode.
A default zone cannot
be enabled when the
switches in a fabric
are set to Open
Fabric mode.
Change the setting from
Open Fabric mode to
Homogeneous mode and
retry the default zoning
operation.
Download complete.
Click OK and start
the HAFM.
Download of the
HAFM and product
manager applications
is complete.
Start the HAFM application to
continue.
Duplicate community
names require
identical write
authorizations.
If configuring two
communities with
identical names, they
must also have
identical write
authorizations.
Verify that both communities
with the same name have the
same write authorizations.
Duplicate name in
zoning configuration.
Every name in the
zoning library must
be unique.
Modify (to make it unique) or
delete the duplicate name.
Duplicate nickname
in nickname
configuration.
Duplicate nicknames
cannot be configured.
Modify the selected nickname
to make it unique.
Duplicate
World-Wide Name in
nickname
configuration.
A world-wide name
can be associated
with only one
nickname.
Modify (to make it unique) or
delete the selected
world-wide name.
Message Description Action