Filter
Top Products
3–14 edge switch 2/16 service manual
Repair Information
• Alert - If link incident (LIN) alerts are configured for the port through the
Configure Ports dialog box, a yellow triangle appears in the column when a link
incident occurs. A yellow triangle also appears if beaconing is enabled for the
port. A red and yellow diamond appears if the port fails.
Click anywhere in the port row to open the Port Properties dialog box. Right-click
anywhere in the port row to open a menu to:
• Open the Port Properties dialog box.
• Open the Node Properties dialog box.
• Display the Port Technology dialog box.
• Block or unblock the port.
• Enable port beaconing.
• Perform port diagnostics.
• Enable or disable port channel wrapping. This menu option appears only when the
switch is configured for S/390 operating mode.
• Swap one Fibre Channel port address with another. This menu option appears
only when the switch is configured for S/390 operating mode.
• Clear link incident alerts.
• Reset the port.
• Configure Port Binding.
FRU List View
The FRU List View (Figure 3–8 on page 3-15) displays a list of all switch FRUs. The
information is useful to maintenance personnel for fault isolation and repair
verification.